Casa > Teflon Foglio > 3-100mm Virgin Ptfe Sheet - 3-100mm Virgin Ptfe Sheet

3-100mm PTFE vergine Sheet

3-100mm 100% Pure Virgin Ptfe Sheet / Teflon Foglio COX plastica offrono solo prodotti Virgin PTFE. Doppio un'indennità se contenenti materiale riciclato.

FOB: NOI $ 6 – 10 / Chilogrammo

Min.Order Quantità: 1 Ton/Tons
Capacità di fornitura: 1000 Ton / tonnellate al mese
Porta: Ningbo
Termini di pagamento: L / C,T / T,Western Union,MoneyGram

3-100mm 100% Pure Virgin Ptfe Sheet / Teflon Foglio di imballaggio & Consegna

dettagli sul confezionamento: Normal packing or according to customer requirement.
Particolare di consegna: within 20 days after order confirmation.

3-100mm 100% Pure Virgin Ptfe Sheet / Teflon Sheet Short Details:

Luogo d'origine: Zhejiang, Cina (Terraferma) Marchio: COX Numero di modello: M-PTFE
Materiale: PTFE, 100% virgin material PTFE Spessore: 1mm-200mm, 0.5mm -40 mm PTFE sheetss Dimensione: 1000mmx2000mm,1220mmx2440mm, Max width: 2000mm
colore: bianca Temperatura: -180 a 260 Densità apparente: 2.10-2.30g/ cm3
Resistenza alla trazione: 22-28 Mpa Allungamento a rottura: 250-300 % Rigidità dielettrica: 40 KV / mm
Tempature Resist: -180-+260oC

3-100mm 100% Pure Virgin Ptfe Sheet / Teflon Sheet Specifications:
3-100mm 100% pure virgin Foglio PTFE / Foglio PTFE
1.degreasing agents.
2.Excellent chemical resistance. 3-100mm 100% pure virgin Foglio PTFE / Foglio PTFE Teflon sheet (TEFLON® PTFE Polytetrafluoroethylene)PTFE (Teflon Foglio) is the mostly consumed category of florin plastics, Which has the lowest coefficient of friction in all the engineering plastics, Whose long-term working temperature can reach 200 a 260. It has the excellent chemical corrosion-resistance,which is able to endureAll kind of chemistry material. And it has rather good electricity-resistance, which is not affected by the temperature and is called Kind of plastics.PTFE plastic has excellent corrosion-resistance, aging-resistance, high(low) temperature resistance, good lubrication and insulation, non-adhesiveness, toxicological harmless. It is widely used in industries like aviation, chemical industry, electric and electronics, bridge, mechanical manufacturing, textile, paper making, ceramics etc.Application:1Aviation industries: Medium lead equipments in hydraulic pressure system and the high middle low pressure piping in the cold pressure system of airplane, capacitor and so on.2 Construction and building industries: bridge, tunnel, steel structure house-support, large-scale chemical pipeline, supporting block of store trough, the supporting pedestal of bridge and the bridge-span circumvolving system and so on.3Chemical machine equipment industries: widely applied in the bearing of paper-making machine and agricultural machine, as the piston ring, machine tool oriented rail and oriented ring.4Electronic and electrical industries: can make insulated wire, capacitor, radio insulated gasket, insulated cable, and the parts of transformer, oxygen sensor, microphone, loudhailer and robot.5 medical treatment field: PTFE is the totally inert material, which has very strong biology applicability, has not any circadian side-effect to the body. So it can be applied in surgical operation suture for the body parenchyma regeneration.

♦ Teflon & PTFE Rod

Extruded PTFE Rods, Canne PTFE sagomati, Filled PTFE Rods. PTFE Rod is available in both virgin grades and reprocessed for less demanding applications. Surf Technologies PTFE rods in all standard sizes from 2mm diameter up to 400mm in diameter. Rod is inventoried in twelve foot lengths so it can be cut into 200mm up to 2000mm lengths. The rods is generally used as machining stock for all kinds of chemical, electrical and mechanical components where the outstanding performance characteristics of Rods are required. Various fillers are available to modify the properties of PTFE ( Teflon ) to meet application requirements. Fluoro-Plastics stocks huge inventories so that same day shipment of most standard sizes is available.

♦ Teflon & Foglio PTFE

Skived Fogli PTFE, Fogli in PTFE in plastica stampata, Fogli PTFE caricato. the PTFE Sheet can be made in any thickness from 0.2mm up to 100mm. PTFE Sheets technology makes it. possible to make in-between sizes. the Teflon Sheets is ideal as a slide surface, for chute liners, other kinds of liners, or for cutting or stamping into gaskets (asbestos substitute) and diaphragms, including complex stamped gasket configurations. It comes in sheets from 300mm square to rolls 1500mm wide. Standard sizes are 1200mm square, 1000mm square, Unless otherwise specified, the edges are not trimmed and all plate is oversized so that blanks can be cut without significant kerf waste. All material is white. Sheet is ideal for cutting into bIanks for machining into smaller parts.

♦ Teflon & PTFE Tubing

Extruded PTFE Tubing, Molded PTFE Tubing, Filled PTFE Tubing. PTFE Tubing is a leader in the manufacture of heavy walled tube, both in standard sizes. the PTFE tube is used in fluid handling applications for high temperature acids and caustics or where contamination is an issue, such as in wire braided hose. In applications where PTFE ‘s excellent insulating properties are needed heavy walled tube is the shape of choice, e.g. in spark plugs for stationary generators, coaxial spacers, connectors. Because drilling a precise hole in longer PTFE ( Teflon ) lengths is impossible, extruded tube is the best way to insure uniform wall thickness throughout the length of the tube. Various fillers are available to modify the properties of PTFE ( Teflon ) to meet application requirements.

Proprietà Metodo Unità Typical Values (from-to)
Specific gravity ASTM D792 2,14 – 2,20
Resistenza alla trazione ASTM D1457 N/mm2 20 – 35
Allungamento a rottura ASTM D1457 % 210 – 400
Compressive strength 1% deformation ASTM D695 N/mm2 4,00 – 4,50
Deformation under load 14 N/mm2 for 24hrs ASTM D621(1) % 10 – 15
Flexural strength 0,7 N/mm2 ASTM D790 N/mm2 no break
Impact strength (Izod) 57°C ASTM D256 J/cm 1,10
Impact strength (Izod) 23°C ASTM D256 J/cm 1,60
Impact strength (Izod) 77°C ASTM D256 J/cm 3,30
Durezza ASTM D2240 (shoreD) 50 – 60
Friction coefficientstatic ASTM D3028 (2) 0,09
Friction coefficientdynamic ASTM D3028 (2) 0,05
PTFE – steel oil lubricated 0,02 – 0,06
Working temperature range °C -200 – +260
Increase in volume from room temperature to molten state (340°C) % 27 – 28
Coefficient of thermal expansion from 25 to 100°C ASTM E831 °C-1 16 X 1-5
Thermal conductivity ASTM D2214 W/mK 0,20
Specific heat 0°C KJ/kg.K 0,96
Specific heat 50°C KJ/kg.K 1,05
Temperature of distortion 0,46 N/mm2 ASTM D648 °C 130 – 140
Temperature of distortion 1,85 N/mm2 ASTM D648 °C 50 – 60
Dielectric strength (short-time air thickness 0,5 mm) ASTM D149 kV/mm 55
Dielectric constant ASTM D150 2,10
Dissipation factor ASTM D150 <0,0002
Volume resistivity ASTM D257 Ohm/cm 10-17
Surface resistivity ASTM D257 Ohm 10-15
Arc-resistance ASTM D495 sec OK (4)
Water absorption ASTM D570 % <0,01
Flammability ATB ASTM D635 sec <5,00
Flammability AEB ASTM D635 mm <5,00

COX plastica – un produttori di foglio di PTFE, Nastro adesivo PTFE, film di PTFE, PTFE asta, cilindro PTFE, tubo in PTFE, guarnizione in PTFE.

spesifikasi diafragma jenis teflon

Nylon Filter Bag - Nylon Filter Bag - PP sacchetto filtro - Poliestere sacchetto filtro - Nylon Filter Bag - Micron PP sacchetto filtro - Micron poliestere sacchetto filtro - Guida Pet Products Buyers